Aiwa AV-D78 Operating Instructions Manual page 5

*
*2
*3
x4
Audio equipment connections
to LINE IN
to LINE OUT
Turntable
Tape deck
SIGNAL
EARTH
to OUTPUT <==
Be sure to connect the VIDEO OUT terminal of a DVD player
directly to a TV set, not through this unit. Otherwise, the picture
noise may appear when playing copy protected DVDs.
Input sound through the 5.1CH INPUT or digital in terminals
(VIDEO 2 COAXIAL IN, VIDEO 1 OPTICAL IN, VIDEO 3
OPTICAL IN) cannot be recorded. When recording the sound
from the DVD, CD, MD or LD player, connect the analog AUDIO
OUT terminals of the player to the corresponding AUDIO IN
terminals of the receiver.
When connecting a monaural video, use a stereo-mono
connecting cord (not supplied).
When connecting an LD player equipped with the AC-3 RF
OUT terminal, use an RF demodulator unit. Also connect the
analog AUDIO OUT terminals of the LD player to the receiver
to play all the sources. For further information, refer to the
instructions of the LD player.
DVD PLAYERS CONNECTIONS
To connect a DVD player without a decoder, connect the player
to the digital input terminal (VIDEO 1 or VIDEO 3 OPTICAL IN)
of the unit.
To connect a DVD player with a decoder and 5.1 ch output
terminals, connect the player to the 5.1CH INPUT terminals of
the unit.
¢ The 5.1CH INPUT terminals are also available when connecting
a digital TV with multi-audio output terminals.
ENGLISH 5