Advertisement
SSM-721AMR
|
How to use the supplied bracket holder
Rear
CAMERA
Caution
© Before making the connections, disconnect the ground
terminal of the car battery to avoid short circuiting.
¢ The plugs should be fully inserted into the connectors or
jacks. A loose connection may cause the unit to
malfunction.
e After connecting the camera cable to the camera
connecting cable of the monitor, be sure to insulate the
connection with insulating tape to avoid possible leakage.
Operation
When you turn the ignition key to the accessory or ON
position, the power is supplied to the monitor and the
monitor becomes standby condition.
DAY/NIGHT
select switch
1 Depress the POWER switch (2 ON).
The picture appears on the monitor.
To turn off the picture, press it again to release
(1 STD
BY). The monitor becomes standby condition.
3 Adjust the VOLUME control.
4 Adjust the picture contrast and brightness.
CONTRAST
BRIGHT (brightness)
for less {
y formore
_ for fess
(Oy
for more
contrast
contrast
brightness
brightness
DAY/NIGHT select switch
Normally keep this switch released
(1 DAY).
When you view the picture at night or in a tunnel, etc.,
depress the switch to make the picture less bright
(.o NIGHT). The picture will be easy to view even in a
dark place.
Advertisement
