Advertisement
Frequency Coverage of
Specifications
sre (e1 Ml ate [0 l-11742) mm Ore) aiege)|
Adjustable frequency bands and the effect of level
adjustment
60 Hz:
Lowering the level will cut the ventilation noise of a
music hall, hurn of electronic instruments, boomy
bass, etc. Raising the level will reinforce the
heavy bass part of a pipe organ or add depth to
the bass sound.
150 Hz: Boosting or cutting the normal bass.
400 Hz:increasing or decreasing the power, spaciousness
and warmth of the sound.
1 kHz:
Providing more presence for vocals, and moving
the sound forward or into the background.
2.4 kHz: Lowering the level will reduce stridency, and
saising will make the base sound brighter.
6 kHz:
Increasing or decreasing the brightness of the
sound; for example, raising the level will make the
violin sound silky smooth.
14 kHz: Changing the general atmosphere rather than the
sound itself. Raising the level will highlight the
delicate quality of instrumental sound, and
lowering will reduce high-frequency noise such as
the resonant peak of a cartridge tape hiss, etc.
Checking the equalization results
Press the EQUALIZATION button again to off (released
position).
The equalizer circuit is bypassed, and you can hear the
sound without equalization.
By switching the EQUALIZATION button on and off,
compare the results.
The spectrum analyzer can be used to visually confirm the
need for and effect of equalizer adjustment.
Bicel'le)(=t-Jaleleltrare
Inputs
LINE IN: Phono jacks, 245 mV (-10 dBs),
50 kilohms
TAPE IN: Phono jacks, 245 mV (-10 dBs),
50 kilohms
Outputs
LINE OUT: Phono jacks,
245 mV (-10 GBs),
Load impedance: more than 10 kilohms
TAPE REC OUT: Phono jacks,
245 mV (-10 GBs),
Load impedance: more than 10 kilohms
Graphic equalizer
Boost/cut range: + 10 dB
Center frequencies: 60 Hz, 150 Hz,
400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 14 kHz
Frequency response (with EQUALIZATION on)
LINE IN: 20 Hz to 40 kHz :?,dB
Harmonic distortion
LINE IN: Less than 0.008%
(at 1 kHz, 1 V output)
Signal-to-noise ratio (with EQUALIZATION on)
LINE IN: Better than 100 dB
(A network, 1 V output)
Power requirements
120 V AC, 60 Hz
Power consumption
5W
AC outlet
1 unswitched, 120 W/1 A max.
Dimensions
Approx. 430 x 80 x 265 mm (w/h/d)
(17x 3 /, x 10 '/, inches)
Weight
Approx. 2.5 kg (5 Ib 8 oz)
Accessory supplied
Audio connecting cords (2)
Design and specifications are subject to change without
notice.
Before going through the check list below, first refer back to the connection and operating procedures.
Should any problem persist after you have made these checks, consult your nearest Sony dealer.
No audio even when the POWER switch is
turned on.
No equalization.
off).
Sony Corporation
Printed in Japan
© Check if the power cord is disconnected.
¢ Check if the connecting cord is disconnected.
¢ Check the TAPE button setting.
¢ Check if the EQUALIZATION button is set to off (the indicator goes
¢ Check the connections.
Advertisement
