Table of Contents
Advertisement
AM loop antenna (supplied)
to the wall outlet <=
Do this connection last!
To improve the FM reception
Connect an outdoor FM antenna to the FM
75Q terminal, using a 75-ohm coaxial cable.
important
Protect the unit from lightning damage by
grounding a wire from the sh terminal
screw clamp. To prevent a gas explosion,
do not connect the ground wire to a gas
pipe.
Screw
clamp
5)
2
fy
75-ohm coaxial cable
(not supplied)
Ground wire
(not supplied)
Right front
speaker
Center speaker
Center speaker
feet
To improve the AM reception
After you connect the AM antenna, connect
a 6- to 15- meter (20- to 50- feet) insulated
wire to the AM terminal. Connect the
+h terminal to ground.
Important
Protect the unit from lightning damage by
grounding a wire from the 7; terminal
screw clamp. To prevent a gas explosion,
do not connect the ground wire to a gas
Pipe.
Insulated wire
(not supplied)
Ground wire
(not supplied)
Left front speaker
Left rear speaker
ISTEP 3 | Connecting the
Power
Connect the AC power cord to the wall
outlet after you have made all of the above
connections.
-
to the wall outlet
Demo mode
The demo mode appears in the display
when you connect the AC power cord to
the wall outlet. To deactivate the demo
mode, press DISPLAY
/DEMO when the
system power is off.
continue to next page >
Chapter 1: Setting Up
5
Advertisement
Table of Contents
