Sony HANDYCAM DCR-DVD7 Operating Manual page 82

A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn off the power, and disconnect tile AC Adaptor flom the v_all outlet. Then, connect it
again.
An unknown picture appears on the screen.
• The camcorder is in [DEMO MODEl (p. 58). Touch the LCD screen or insert a disc to
cancel [DEMO MODEl.
An unknown indicator appears on the screen.
• They may be warning indicators or messages (p. 93).
The picture remains on the LCD screen.
• This occurs if you disconnect the AC Adaptor from the _all outlet or remove the battery
pack x_ithout turning oft"the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
• During Easy Handy, c am operation, you cannot turn the LCD backligfit on/off using the
DISP/BATT INFO. Cancel Easy Handycam operation (p. 25).
The buttons do not appear on the touch panel.
• Toucfi the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander) (p.
21,37).
The buttons on the touch panel do not work correctly or do not work at all.
• A@lst the screen ([CALIBRATION]) (p. 1112).
• If you change the aspect ratio of the picture, Ibe aspect ratio of the button and indicators on
the touch panel will switch to Ihe selected one (p. 55).
82
The disc cannot be removed.
• Make sure the pm_er source lhattery pack or AC Adaptor) is COlmected correctly (p. 17).
• Remove the battery pack from the camcorder, then insert it again (p. 17).
• Insert a charged battery pack into the camcorder (p. 17).
• The temperature of your camcorder is extremely high. Turn off your camcorder and leaxe it
lk_ra while in a cool place.
• Moisture condensation has occurred with the disc. Turn off your camcorder and leaxe it for
about 1 hour (p. l/)l).
• Finalizing is interrupted by turning off your camcorder. Turn on your camcorder and remove
Ibe disc after finalizing is completed.