Related Manuals for KALI AUDIO LP-UNF
Summary of Contents for KALI AUDIO LP-UNF
- Page 1 Project Lone Pine LP-UNF ULTRA-NEARFIELD Studio Monitoring System Users’ Guide Kali Audio LP-UNF Users’ Guide...
-
Page 2: Table Of Contents
INPUTS AND CONTROLS...………………….…...……....…………………6 Front Panel (Volume Control and LEDs) ..........6 Bluetooth Operation.................7 Limiter.......................8 Speaker Channel Assignment..............8 Rear Panel (Inputs, DIP Switches, and Connectors)........9 BOUNDARY EQS AND DIP SWITCHES..…...……......…………….…12 FULL SPECIFICATIONS…………………………….…...……......………………16 FIRST TIME SETUP........…...……......……………….17 TROUBLESHOOTING……………………………………….......…...……………...18 LIMITED WARRANTY…………………………………………………..…......….19 Kali Audio LP-UNF Users’ Guide... -
Page 3: Important Safety Information
22. The power cord must be connected to a Mains socket/outlet with earthing connection. 23. This equipment is not suitable for use in locations where children are likely to be present. 24. This product is intended for use only with the adaptor provided: Manufacturer: Panfore Ltd Model: P24D3000G Kali Audio LP-UNF Users’ Guide... - Page 4 The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operation and maintaining (servicing) instructions in the literature accompanying the appliance. Kali Audio LP-UNF Users’ Guide...
-
Page 5: About Your Speakers
With the LP-UNF, if you have space to sit down, you have space for a studio. -
Page 6: Inputs And Controls
+6 dB (maximum ouput). LED Indicator Indicates power status, output level, mute, Bluetooth pairing mode, fault, and other func- tions. A full listing of LED statuses and what they mean can be found on the next page. Kali Audio LP-UNF Users’ Guide... -
Page 7: Bluetooth Operation
LED Indicator Center LED On: Power On The single center LED indicates that the LP-UNF is powered on. If you do not wish to have a constant power indication, you can turn this LED off by flipping DIP switch #8, on the back of the speaker, up. -
Page 8: Limiter
4. If the channel indicated is not the channel you would like to play through the primary, repeat steps 1-3. The LEDs should flash on the opposite side the sec- ond time. 5. Turn the unit off and on one more time for the change to take effect. Kali Audio LP-UNF Users’ Guide... -
Page 9: Rear Panel (Inputs, Dip Switches, And Connectors)
Inputs and Controls Kali Audio LP-UNF Users’ Guide... - Page 10 Use with certain smartphones may be possible, but is not supported. On/Off Switch Power the speaker on and off. Be sure to power the speaker off when connecting or disconnecting the power cable, during lighting storms, or during extended periods of disuse. Kali Audio LP-UNF Users’ Guide...
- Page 11 This features an IEC Connector, and the LP-UNF ships with whatever plug your country uses. If you use the LP-UNF in a place with a different plug, you may purchase a local IEC cable. The IEC connector connects to the power supply (12) and the prongs go into an AC power outlet.
-
Page 12: Boundary Eqs And Dip Switches
Position 3: On a Desk, Against a Wall The speaker is on a desk or table, and is as close to a wall as possible without pinching any cables. Switch 1: DOWN Switch 2: UP Switch 3: DOWN Kali Audio LP-UNF Users’ Guide... - Page 13 Position 7: On a Recording Desk, Against a Wall The speaker is on a recording desk with built-in monitor risers, and is close as possible to a wall without pinching any cables. Switch 1: DOWN Switch 2: UP Switch 3: UP Kali Audio LP-UNF Users’ Guide...
- Page 14 Switches 1-3: Boundary Compensation EQs Position 8: Programming Mode The LP-UNF has the ability to update firmware over the USB-C connector. From time to time, Kali will release new firmware that improves performance and/or adds functionality to the LP-UNF. Be sure to register your LP-UNF at kaliaudio.
- Page 15 LF trim will be DISENGAGED and switch 7 will have no effect. Switch 8: Power LED By default, the center LED on the powered unit will remain lit whenever the unit is powered on. If you wish to turn it off, set switch 8 UP. Kali Audio LP-UNF Users’ Guide...
-
Page 16: Full Specifications
Apple iPads (with Camera Kit) Trims: LF & HF +/-2dB Speaker Height: 10 Inches (25.4 cm) Speaker Width: 6.5 Inches (16.4 cm) Speaker Depth: 7.4 Inches (18.6 cm) Speaker Weight (Primary/Secondary): 7.1 lbs (3.2 kg)/6.6 lbs (3 kg) Kali Audio LP-UNF Users’ Guide... -
Page 17: First Time Setup
It does not matter which end of the 4-prong cable goes to which speaker. The included cable should be long enough to use the LP-UNF as presribed, but if you would like a lon- ger cable, they are available to purchase at kaliaudio.com 3. -
Page 18: Troubleshooting
If you’re using a Windows computer, restart the computer. Make sure that you have the newest audio drivers installed. • If you’re using a Mac computer, restart the computer. Make sure that you are running the most recent operating system. If you’re still having trouble, contact Kali’s customer service for help! Kali Audio LP-UNF Users’ Guide... -
Page 19: Limited Warranty
Damage resulting from an unauthorized person servicing the product. Damage resulting from the product being left plugged in during an elecrical storm. The warranty applies only in the United States. International Customers should contact their dealer about their warranty policy. Kali Audio LP-UNF Users’ Guide... - Page 20 1-7 bright, 8 medium 1-8 bright 1-8 bright, 9 dim 1-8 bright, 9 medium 1-9 bright 1-9 bright, 10 dim 1-9 bright, 10 medium 1-10 bright 1-10 bright, 11 dim 1-10 bright, 11 medium All bright +6 dB Kali Audio LP-UNF Users’ Guide...