Related Manuals for KALI AUDIO LP-6
Summary of Contents for KALI AUDIO LP-6
- Page 1 PROJECT LONE PINE PROFESSIONAL STUDIO MONITORS LP-6 User Manual KALI AUDIO LP-6 USER MANUAL...
-
Page 2: Table Of Contents
Table of Contents Important Safety Information………………………….3 About Your Studio Monitor……………………………….5 Full Specifications………………………………………………7 Inputs and Controls……………………………………………8 Boundary EQs and Dip Switches…………………….11 First Time Setup………………………………………………...14 Warranty Information……………………………………….15 Troubleshooting………………………………………………...16 KALI AUDIO LP-6 USER MANUAL... -
Page 3: Important Safety Information
A. The LP-6 and LP-8 Studio Monitors are compatible with an accessory plate manufactured by Kali Audio, Inc., for use with a wall mount adapter. Only this plate should be used to mount the apparatus to any surface. Follow all instructions in the literature accompanying that prod- uct. - Page 4 The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operation and maintaining (servicing) instructions in the literature accompanying the appliance. KALI AUDIO LP-6 USER MANUAL...
-
Page 5: About Your Studio Monitor
Output The LP-6 Professional Studio Monitor is designed to have a continuous output of 85 dB at 2 meters with 20 dB of headroom. In practical terms, this means that the speaker has sufficient output to listen at safe levels for long periods of time in most listening environments that were designed for 1 or 2 lis- teners. - Page 6 This sound will add to the noise floor and obscure the details of the low end. The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same veloc- ity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and de- void of extra noise.
-
Page 7: Full Specifications
On a desk, against a wall Enclosure: Front Ported Height: 14.125 Inches (35.9 cm) Width: 8.75 Inches (22.2 cm) Depth: 10.25 Inches (26 cm) Product Weight: 15.54 lbs (7.01 kg) Shipping Weight: 18 lbs (8.16 kg) KALI AUDIO LP-6 USER MANUAL... -
Page 8: Inputs And Controls
Inputs and Controls KALI AUDIO LP-6 USER MANUAL... - Page 9 However, do not connect both XLR and TRS to the same speaker at the same time. Unbalanced, TS ¼” cables may also be used, although these are far more susceptible to noise. KALI AUDIO LP-6 USER MANUAL...
- Page 10 Power Input Connect the IEC cable that came with the speaker to this input. The LP-6 has an inter- nal, automatic switching power supply, so there’s no need to worry about setting it for your local voltage.
-
Page 11: Boundary Eqs And Dip Switches
Position 3: On Stands, Against a Wall The speaker is on a monitor stand, and is within .5 meters (20 inches) of a wall, with- out being butted right against one. Switch 1: UP Switch 2: UP Switch 3: DOWN KALI AUDIO LP-6 USER MANUAL... - Page 12 The speaker is on a desk or table, and is as close to a wall as possible without pinching the input or power cables plugged into the back. Switch 1: UP Switch 2: UP Switch 3: UP KALI AUDIO LP-6 USER MANUAL...
- Page 13 When connecting to the RCA input, enable it by moving switch #8 on the dip switches UP to the ON position. If the RCA input is no longer being used, be sure to move switch #8 back DOWN to the OFF position. KALI AUDIO LP-6 USER MANUAL...
-
Page 14: First Time Setup
•Set the boundary EQ for your application. Refer to page 11 above. •Repeat these steps for every speaker you’re using. •Sit in your listening position, and turn the volume up on your playback device to the desired level •Enjoy your new studio monitors! KALI AUDIO LP-6 USER MANUAL... -
Page 15: Warranty Information
Warranty Information Your speaker is under warranty for 1 year from the date of purchase. The warranty covers defects in materials and/or workmanship at the time of purchase. LEGAL LANGUAGE TO BE INSERTED KALI AUDIO LP-6 USER MANUAL... -
Page 16: Troubleshooting
Disconnect the problematic speaker, and plug that same cable into another speaker. If you’re hear- ing the same issues, there is likely a problem in your signal path, and not the speaker. If you’ve determined that your problem is with your speaker, contact your dealer to initiate a return. KALI AUDIO LP-6 USER MANUAL...