Table of Contents
Advertisement
- REAR VIEW - [Fig.3]
7 F.FWD button-
Press to rapidly advance the tape, or
to view the picture rapidly in forward during
playback mode. (Forward Search)
► button-
• When setting program (for example: setting clock or
timer program), press to determine your selection
and proceed to the next step you want to input.
• Press to determine setting modes from on screen
menu.
• Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET UP)
8 REC button-
Press for manual recording.
OTR button-
Activates One Touch Recording,
(only on the TVWCR)
9 RECORD indicator-
Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
10 Remote Sensor Window—
Receives the infrared
signals from the remote control.
11 CHANNEL
A / T
buttons—
Press to select the de¬
sired channels for viewing or recording.
TRACKING function-
Press to minimize video
'noise' (lines or dots on screen) during playback
mode. (See page 21.)
12 VOLUMEa /
V
buttons-
Adjust the volume level.
13 POWER button-
Press to turn TVWCR on and off.
Press to activate timer recording.
14 Cassette compartment
15 Number buttons-
Press to select desired channels
for viewing or recording. To select channels from
1
to 9, first press the 0 button and then 1 to 9.
+100 button-
When selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the "+100" button then press "2" and "5").
16 MENU button-
Press to display the main menu on
the TV screen.
17 DISPLAY button-
Display the counter or the current
channel number and current time on the TV screen.
(See page 16)
18 SPEED button-
Press to choose the desired
recording speed:SP/SLP.
19 T-PROG. CLEAR button-Press
to cancel a setting of
timer program (See page 27).
COUNTER RESET button-
Press to reset counter to
0
:
00
:
00
.
20 GAME button-
Sets the game mode and external
input mode at the same time. (See page 17.)
21 TIME SEARCH button-Press
to activate Time
Search mode.
22 PAUSE/STILL button-
Press to temporarily stop the
tape during the recording or to view a still picture
during playback.
23 MUTE button-
Mutes the sound. Press it again to
resume sound.
24 CHANNEL RETURN button-Press
to go back to the
previously viewed channel. For example, pressing
this button once will change channel display from 3
(present channel) to 10 (previously viewed channel),
and pressing it a second time will return from 10 to
3.
25 WAKE UP/SLEEP button—
Sets the Wake up or
Sleep Timer. (See page 28.)
26 Power cord-
Connect to a standard AC outlet
(120V/60HZ).
27 ANT. terminal-
Connect to an antenna or cable sys¬
tem.
-
9
-
EN
9C16
Advertisement
Chapters
Table of Contents
