FUNAI F3819D Owner's Manual page 15

MANUAL CLOCK SETTING
Make sure
...
• Use the remote control for this procedure.
• TVA'^CR power must be turned on.
In the example below, the clock is to be set to:
DATE March 1st, 1999
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press the MENU button.
Press the PLAY/A or STOP/V
button to point to "SETTING
CLOCK".
Then, press the F.FWD/^ button.
2
Select "MANUAL CLOCK SET"
Press the PLAY/A or STOP/V
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD/^ button.
3
Select the month
Press the PLAY/A or STOP/T
button until your desired month
appears.
(Example: March 03)
Then, press the F.FWD^ button.
4 Select the day
Press the PL AY/A or STOP/T
button until your desired day
appears. (Example: 1st —> 01)
Then, press the F.FWD^ button.
5 Select the year
Press the PLAY/A or STOP/T
button until your desired year
appears. (Example: 1999)
Then, press the F.FWD/^ button.
{
6
Select the hour
1
I Press the PLAY/A or STOP/T
* button until your desired hour
j
appears. (Example: 5, PM)
I
Then, press the F.FWD/^ button.
I 7 Select the minute
I
Press the PLAY/A or STOP/T
button until the desired minute
appears. (Example: 40)
i .
8
Start the clock
{ Press the MENU button.
i Although seconds are not dis-
j
played, they begin counting from
00 when you press the MENU
button. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 30 seconds, you may have to reset
the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD/^ or REW/^ button.
j
3) Enter correct numbers using the PLAY/A or
i
STOP/T button.
1
4) Press the MENU button to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your
cable system, select "AUTO CLOCK" and press the
F.FWD/^ or REW/^ button to turn [OFF] this func¬
tion. Then you can manually adjust the clock.
-
15
-
EN
9C16