Related Manuals for AMTAST AMT605
Summary of Contents for AMTAST AMT605
- Page 1 AMTAST AMT605 Gloss Meter Please read this manual carefully before using and reserve it for reference. Page 1 of 7...
-
Page 2: Product Introduction
I. Product Introduction AMT605 is a hand-held gloss meter with three geometries of 20°, 60° and 85°, it measures up to three gloss values at the same time. This gloss meter can be used to measure the gloss of paint, coating, ink, plastic, paper, ceramic, stone, metal and electroplating layer, etc. -
Page 3: Operation
Language Simplified Chinese, English Charge Port USB(Type-C) Data Transmission Working Temperature 10~45℃,0~85%RH (no condensation) Storage Temperature -10~60℃,0~85%RH (no condensation) III. Features Real-time and put-and-measure services. Detect samples quickly with the QC judging function. The environmental temperature compensation function guarantees long-term calibration stability. Support USB transmission and provide PC operating software, it can be online operated with a PC to generate test report. - Page 4 Short press the button to select normal mode or QC mode, long press the button for 3s to complete the setting, exit the setting and enter the calibration interface. Geometry Selection Short press the button to select geometry, single angle: 20°, 60° or 85°; dual angles: 20°60°, 20°85° or 60°60°;...
- Page 5 The upper and lower limits could be set by PC software. For specific operations, please refer to the "Gloss Meter Software Operation Manual". V. PC Software Download at www.amtast.com/soft/amt605.rar Connect the instrument to PC software via USB cable to perform functions of online measurement, change calibration values, parameter setting, test report generation and printing.
- Page 6 VI. Precautions 1. The temperature compensation function guarantees long-term calibration stability, it is recommended to calibrate once a week. If the environmental temperature changes significantly, please recalibrate it. 2. The measuring port of the instrument shall be attached to the surface of the object to avoid leakage of external light.
-
Page 7: Packing List
9. The recommended calibration period is once a year and the factory provides calibration services. VII. Packing List Description Quantity Unit Gloss Meter USB Data Cable USB Disk (software) Special Lens Cloth User Manual Certificate / Warranty Card VIII. Service The instrument has one-year warranty.