Table of Contents
Advertisement
Quick Links
USER MANUAL
Congratulations on your purchase of a Squirrel FREAK 4 ("product"). By purchasing this product,
you acknowledge that engaging in sky-diving, BASE jumping, parachuting, and "wingsuiting" is an
inherently dangerous activity that requires training, proficiency, and skill. Use of this product may result
in serious injury or death. Do not use this product without inspecting it and all of its components before
each and every use. You acknowledge and agree that even when properly used, this product may cause
serious bodily harm or even death. You, the purchaser, acknowledge and agree that this product is
intended for inherently dangerous recreational purposes, and you assume all risk, responsibility, and
liability whatsoever from any and all injuries (including death), losses or damages to persons or property
arising from the use of this product sold by Squirrel, LLC to you, the purchaser. Squirrel is not liable for
any special, consequential, incidental, punitive, or indirect damages or anticipated profits, however
caused, in relation to the purchase and use of this product. In no event shall Squirrel's total liability to
you, as purchaser, or your assigns, heirs, representatives, and other similarly situated persons, for all
damages, losses, and causes of action exceed the purchase price paid by you, the purchaser, for this
product. This product has been purchased by you "as is" and without warranties of any kind, either
express or implied. To the fullest extent permissible pursuant to applicable law, Squirrel, LLC disclaims
all warranties, express or implied, including, but not limited to, warranties of title and implied warranties
of merchantability and fitness for a particular purpose.
PLEASE READ THIS CAREFULLY BEFORE DOING ANYTHING WITH YOUR NEW WINGSUIT
Contents
High Aspect Ratio Inlet .............................................................................................................................................................................. 3
Air Cross-Section ("Arm Foam") Options ................................................................................................................................................... 3
Attaching Your Suit and Gearing Up .......................................................................................................................................................... 4
Zipper Bungees ......................................................................................................................................................................................... 4
Holding Your Profile Gripper, and Positioning the Leading Edge of Your Suit ............................................................................................. 5
The MonoChamber .................................................................................................................................................................................... 6
Arm and Leg Wing Internal Zippers .......................................................................................................................................................... 6
Nutsack .................................................................................................................................................................................................... 6
Chest Pocket ............................................................................................................................................................................................. 6
Leg Wing Zipper Pulls ............................................................................................................................................................................... 7
Hook Knife ............................................................................................................................................................................................... 7
Sleeping And Bathing Your Squirrel .......................................................................................................................................................... 7
Contact Us ................................................................................................................................................................................................ 7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Squirrel FREAK 4
Summary of Contents for Squirrel FREAK 4
- Page 1 (including death), losses or damages to persons or property arising from the use of this product sold by Squirrel, LLC to you, the purchaser. Squirrel is not liable for any special, consequential, incidental, punitive, or indirect damages or anticipated profits, however caused, in relation to the purchase and use of this product.
- Page 2 Please note that the FREAK 4 is a moderate to large size wingsuit with backfly inlets. What this means is that (like any suit with backfly inlets) the FREAK 4 will maintain pressure in almost any configuration, even if you are not in control of it.
- Page 4 Air Cross-Section (“Arm Foam”) Options Your FREAK 4 is shipped with 5mm black foam, which is inserted in the arms. We recommend starting with this foam option. The FREAK 4 may be jumped without this foam, but your leading edge will appear less smooth, and be less efficient in flight.
- Page 5 Attaching Your Suit and Gearing Up For a comprehensive video on how to attach your container to your wingsuit, please watch our http://squirrel.ws/gearingup Gearing Up video: Zipper Bungees The bungees that hold the zippers tight to the main lift webbing (MLW) of your harness must always be connected.
- Page 6 Holding Your Profile Gripper, and Positioning the Leading Edge of Your Suit Holding your grippers correctly is an important part of controlling your FREAK 4. The Integrated Profile Gripper allows you to pull tension and manipulate the arm wing efficiently, while providing an aerodynamic inflated “fairing”...
- Page 7 The MonoChamber The Freak 4 is the first public product we have released which uses the MonoChamber design. Air flows through channels located behind the upper leg area, allowing the arm wings and leg wing to share pressurization. In addition to smoothing out the leg wing / arm wing junction at the top surface, the MonoChamber creates a more consistent and coordinated feel in the wing.
- Page 8 Sleeping And Bathing Your Squirrel Don’t smother your Squirrel! When it’s hibernating, it likes to breathe and relax in a cool, dry, comfortable nest. Do not store your suit for long periods of time in a tightly folded or compressed manner.
Need help?
Do you have a question about the FREAK 4 and is the answer not in the manual?
Questions and answers