Advertisement

Quick Links

Congratulations on your purchase of a Squirrel CRUX 2 3R ("product"). By purchasing this
product, you acknowledge that engaging in sky-diving, base jumping, parachuting, and
"wingsuiting" is an inherently dangerous activity that requires training, proficiency, and skill.
Use of this product may result in serious injury or death. Do not use this product without
inspecting it and all of its components before each and every use. You acknowledge and
agree that even when properly used, this product may cause serious bodily harm or even
death. You, the purchaser, acknowledge and agree that this product is intended for inherently
dangerous recreational purposes, and you assume all risk, responsibility, and liability
whatsoever from any and all injuries (including death), losses or damages to persons or
property arising from the use of this product sold by Squirrel, LLC to you, the purchaser.
Squirrel is not liable for any special, consequential, incidental, punitive, or indirect
damages or anticipated profits, however caused, in relation to the purchase and use of
this product. In no event shall Squirrel's total liability to you, as purchaser, or your assigns,
heirs, representatives, and other similarly situated persons, for all damages, losses, and
causes of action exceed the purchase price paid by you, the purchaser, for this product.
This product has been purchased by you "as is" and without warranties of any kind, either
express or implied. To the fullest extent permissible pursuant to applicable law, Squirrel, LLC
disclaims all warranties, express or implied, including, but not limited to, warranties of title
and implied warranties of merchantability and fitness for a particular purpose.
Please read this carefully before doing anything with your new container system
CONTENTS
The System .............................................................................................................................................................1
Closing Loops ..........................................................................................................................................................1
Packing Tips ............................................................................................................................................................1
Container Closure ....................................................................................................................................................3
Pin Tension For Slider Up Jumping ............................................................................................................................3
Magnetic Bridle Keeper ...........................................................................................................................................3
3-RING RISERS ........................................................................................................................................................5
USE .................................................................................................................................................................................................. 5
ASSEMBLY ........................................................................................................................................................................................ 5
INSPECTION...................................................................................................................................................................................... 7
MAINTENANCE .................................................................................................................................................................................. 8
Light Buckles ...........................................................................................................................................................8
Slider Retention ......................................................................................................................................................9
Rappel Anchor Loops, and Rappel Slings ..................................................................................................................9
Container Shape ......................................................................................................................................................9
PC Placement ........................................................................................................................................................10
Chest Strap ...........................................................................................................................................................10
Dyneema Blend Webbing .......................................................................................................................................10
General Inspection and Maintenance ......................................................................................................................10
Contact Us.............................................................................................................................................................11
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CRUX 2 3R and is the answer not in the manual?

Questions and answers

Summary of Contents for Squirrel CRUX 2 3R

  • Page 1: Table Of Contents

    (including death), losses or damages to persons or property arising from the use of this product sold by Squirrel, LLC to you, the purchaser. Squirrel is not liable for any special, consequential, incidental, punitive, or indirect damages or anticipated profits, however caused, in relation to the purchase and use of this product.
  • Page 2: The System

    Common techniques used to pack other 2-pin container systems, which use a floor-plate closing method for the top pin, will work for the CRUX 2 3R as well. Please keep these points in mind: If using the floor plate for the top loop, then we recommend placing your pull-up cord through the top closing loop before placing your canopy in the container (easier to access once the parachute is covering the loop).
  • Page 3 When your CRUX 2 3R is closed, the main pin cover flap should be cleanly seated. Check your placement of the packjob volume. It should be dispersed evenly from corner to corner and match the shape of the container.
  • Page 4: Container Closure

    CONTAINER CLOSURE Always double check pin tension, orientation, and closure. There are many ways to pack a container incorrectly. There is one best practice for packing and closing this container. The bridle should be routed between the grommets, to the top loop, then the bottom.
  • Page 6: 3-Ring Risers

    The CRUX 2 3-ring risers are the result of laboratory load testing and field testing by our R&D team and Squirrel team jumpers. Note that the CRUX 2 3-ring risers are “reverse”. When assembled, the rings will be facing the jumper.
  • Page 7 Cable Configurations Single-Cable Configuration: There should be 5.5 in. (14 cm) of excess cable extending past the cable housing grommet. Thread the yellow cutaway cable from the main cable housing through the white loop. It should then pass into the correct channel on the riser. NOTE THAT THERE ARE TWO CHANNELS.
  • Page 8: Inspection

    Your 3-ring risers must match the correct illustrations, exactly. If your riser assembly does not match the illustrations, it will not function correctly. If you need assistance, contact Squirrel before use or enlist the help of a rigger who is experienced with this specific CRUX 2 3-ring system.
  • Page 9: Maintenance

    LIGHT BUCKLES The CRUX 2 3R features aluminum plate buckles. Be sure to assemble them correctly, and inspect them before every jump. Webbing must pass around the middle bar of the small buckle. The entire small buckle then passes through the hole in the larger buckle.
  • Page 10: Slider Retention

    The front riser loop has a type 3 webbing anchor inside which can be used with the retention lines included with your CRUX 2 3R to secure the slider as shown: Insert the retention line into the top hole of webbing anchor with the blue line.
  • Page 11: Pc Placement

    GENERAL INSPECTION AND MAINTENANCE The critical junctions of the CRUX 2 3R are easy to inspect. All major bartacks are made with contrasting color thread and are easily accessible. Always inspect your CRUX 2 3R before each use and discontinue use immediately if you see any evidence of wear or damage.
  • Page 12: Contact Us

    & the local SQRL pros near you, we’re here to help. -Matt, Mike, Will, Marty, & All the Team www.squirrel.ws fly@squirrel.ws + 1-855-FLY-SQRL THANK YOU FOR FLYING SQUIRREL! Check the CRUX 2 3R product page at www.squirrel.ws for the latest PDF version of this manu- v.202307 -...

Table of Contents