Table of Contents
Advertisement
6.4.1 BROWSE TEXT DOCUMENTS
Press
t u
to select Text in the main menu. Then press
the le you want to display by using
back to previous menu.
6.4.2 SOFTWARE UPDATE VIA USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our
website www.strong-eu.com. Search the model number on our website's service support section. If there is an improved software
version you can download the le and copy it to the root of a USB device. Then press
from the Option menu on your TV. Plug your USB device into the USB slot and press ENTER to update the respective software.
Con rm with Yes using
t u
supply and plug in again.
7.0 TROUBLESHOOTING
There maybe various reasons for abnormal operation of your TV set. Check your TV set according to the general procedures
shown below. Additionally, we strongly recommend reading the detailed troubleshooting of your TV set in the full user manual
available on our website www.strong-eu.com. If your TV set does not work properly after checking the general and detailed
troubleshooting, please contact your dealer, the local Service Hotline, or send an email to our support via www.strong-eu.com.
DO NOT try to open or disassemble your TV set. It may cause a dangerous situation and the warranty will be void.
Problem
Possible cause and solution
The LED/Standby
indicator does not
light up
No Signal
The picture and
DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by electromagnetic, high-frequency,
sound remain frozen,
or other interference signals. DVB-T/T2 : Disturbances caused by signal re ections.
or macro blocks or
DVB-C, DVB-S/S2: The connection cables at the signal source are too long (too high attenuation).
similar distortion are
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got misaligned after storm etc.
visible on the screen.
Any other reception
or signal related
problems
No colour
No picture, normal
sound
pq t u
and con rm with OK. Quit step by pressing ENTER. Press
. When the update is completed, remove the USB stick, disconnect your device from the main power
1. Check whether the power connector is completely plugged at the TV and into power socket.
2. Make sure that the switch on multipoint connectors is switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
1. The TV is not connected to a signal source (DVB-C, DVB-S/S2 or DVB-T/T2) or the antenna
(terrestrial or satellite antenna) is maybe not aligned correctly respectively the according
connection and distribution equipment might show malfunction, incompatibility or defectives.
2. DVB-T/T2: Active antennas need antenna power switched ON or external power connected.
Antenna is maybe out of digital signal reception in your area. Check reference from service
providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one or some channel(s) changed to
another transponder or are no longer emitted). Incorrect values of LNB parameters.
1. Generally cables might have loosened. Moisture might have entered into cables or connectors.
There is heavy rain or heavy storm at present (DVB-S/S2 and -T/T2). Check the cable connections.
DVB-S/S2 and -T/T2: Check all equipment connected between the reception point and the TV.
2. Wait until heavy rain/thunderstorm passed. If no solution ask a local satellite specialist for advice.
DVB-S/S2: The satellite dish is NOT aligned to the (correct) satellite(s). Ask a local satellite specialist
for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings are in path. Ask a local satellite specialist for
advice.
4. DVB-S/S2: Signal is too strong, maybe need to be atennuated. Ask a local satellite specialist for
advice.
1. Devices are not properly connected (scart, RCA sockets) or wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the current programme is broadcast in black and
white.
1. Adjust the brightness and contrast
2. Radio channel is tuned to or the programme is not transmitting Video signals or another
broadcasing interference/failure.
t u
to select the drive disk you choose to watch and ENTER to enter. Select
16
t u
to select return and go
pq
button to select Software Update (USB)
Advertisement
Table of Contents
