Canon VIXIA HFS11 Instruction Manual page 165

No
.Q,
print orders have been set
- No photos have been marked with a print order.
Paper error
- There is a problem with the paper. The paper is not correctly loaded or the paper size is
wrong.
- If the paper output tray is closed, open it to print.
Paper jam
- The paper jammed during printing. Select [Stop] to cancel printing. After removing the paper,
set some paper again and retry printing.
Paper lever error
- Paper lever error occurred. Adjust the paper selection lever to the proper position.
X photos could not be printed
- You attempted to use the print order settings to print Xphotos that were recorded with
another camcorder, have a different compression, or were edited on a computer.
Print head not installed
- No print head is installed in the printer or the print head is defective.
~
Print order error
- You attempted to set more than 998 photos in the print order.
Printer cover open
- Close the printer cover securely.
Printer error
- A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer1s
green power lamp and orange error lamp flash alternately.)
- Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the
power outlet and contact the appropriate customer support center or service center.
Printer in use
- The printer is in use. Check the printer status.
Printing error
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. Check the printer status.
- When you are printing using the
.Q, ~
button, check the print settings.
Readjust trim settings
- The trimming settings for this photo were lost as a result of changes in the paper-related set-
tings.
Additional Information •
165
I