Yamaha pf10 Owner's Manual page 3

FEATURES AND FUNCTIONS/CONNECTION
Since the Pf10 features a built-in amplifier and speakers, you can begin playing the instrument as soon as you plug in the power
cord and turn on the power switch. In order to become familiar with the operation of the Pf10, follow the procedures outlined
below.
Speaker KEY TRANSPOSE
TONE SELECT
SS |
| E E 00000 |
1. Power Cord
Insert the PF10 power plug into the most convenient AC
wall outlet.
2. Power Switch
Push the Power switch located on the far right of the
control panel to the ON position. The power indicator will
light and the PF10 is ready to play.
@ When turning the power off, first turn the VOLUME
control all the down by sliding it to the left position.
Then turn the Power switch off.
@ Check whether the A/B selection switch in the TONE
SELECT panel is in the A position (out). If it is in the B
position (in) press the switch to set it in the A position.
® Depress the TONE SELECT PIANO | switch.
@ Gradually turn the VOLUME control while pressing one
of the PF10's keys and you should hear the correspond-
ing note from the built-in speaker.
e Note loudness can be changed by applying different
amounts of pressure to the key.
3. Connection to an External Speaker System
In order to use headphones or an external speaker system
rather than the built-in speaker system, connect the head-
phones or amp/speaker to the appropriate jack (or jacks) in
the rear panel.
STEREO CHORUS
Power Indicator
Power Switch
Speaker
Keyboard Range
The keyboard range is from EO to G6 (76 keys, 6 octaves),
The maximum number of notes that can be produced
simultaneously is 16.
@ PHONES (phone and mini)
Tow headphones jacks are provided: one stereo phone jack
and a stereo mini jack. Use of stereo headphones allows you
to enjoy a rich stereo listening effect, while other mini
headphones can be plugged into the mini jack for con-
venient private listening to the keyboard.
e When headphones are connected the PF10's enclosed
speakers will be automatically shut off so that no sound
comes out.
B OUTPUT | and OUTPUT Il
Either of these jacks can be used to provide the PF10
output signal to an external power amplifier, integrated
amp/speaker (such as any standard musical instrument
amplifier) or mixer. A speaker with no built-in amplifier
cannot be connected directly to these jacks. A power
amplifier and speaker system or an integrated amp/speaker
must be used.
@ When connecting the PF10 to an external stereo system,
connect the plug to the stereo amp's AUX terminal.