Sony Trinitron KV-13TR28 Operating Instructions Manual page 48

Troubleshooting
e Adjust PICTURE.
Poor or no picture (screen not lit), good sound e Adjust BRIGHTNESS.
e Check antenna/cable connections.
e Press VOLUME + on the TV or VOL + on the Remote Commander.
e Press MUTING on the Remote Commander.
Good picture, no sound e Check that the MTS setting is set correctly.
e Check that the TV/VIDEO button is set correctly.
e Check that "SPEAKER ON" is set.
e Is the battery used up?
Good picture, no sound from the cordless e is the cordless headphones power tured on?
headphones Adjust the cordless headphones volume control.
e Make sure HEADPHONES is set to ON.
e Is the battery used up?
Good picture, noisy sound from the cordless e Remove obstacles between the infrared emitter and the cordless
headphones headphones.
e Is the infrared detector covered by your hands, hair, etc?
e Adjust the direction and the position of the infrared emitter.
e Is POWER switched on?
¢ Plug the unit into a wall outlet.
e Check that the TV/VIDEO button is set correctly.
e Make sure S VIDEO is set to on.
No picture (screen not lit), no sound
e Is it a color program?
No color ° Adjust COLOR.
e Is it an active or the correct channel?
Snow and noise only Check the CABLE setting.
e Check antenna/cable connections.
This is often caused by local interference. (e.g. cars, neon signs,
Dotted nee or eulpes hairdryers etc.) Adjust the antenna for minimum interference.
: Reflections from nearby mountains or buildings often cause this
Double images or ghosts problem. A highly directional outdoor antenna or a CATV cable may
improve the picture.
Try another channel. It could be station trouble.
If the problem persists, contact your nearest service facility.
Sony Corporation Printed in U.S.A.