Advertisement
» Clean the Trimmer after each use.
» Do not use water or a moist cloth to clean the
Trimmer.
» Always switch Trimmer OFF, unplug and remove
power supply cord from Trimmer before clean-
ing.
» Do not use compressed air, abrasive cleaning
agents, scourers or liquids such as alcohol,
benzene, bleach or acetone to clean the
Trimmer and attachments.
D Never clean, replace or remove Trimmer
attachments with motor ON.
» Do not apply pressure to cutters.
» Do not touch cutters with hard objects as this
may damage them.
» Do not use while bathing, showering or
immerse Trimmer in water or other liquids as
damge to Trimmer may occur.
During Use:
Ð If cut hairs have accumulated in the comb
area, remove hairs by shaking, blowing or using
cleaning brush provided. Remember to adjust
the trimming length back to your selected set-
ting when you replace the comb on Trimmer.
After Each Use:
E Make sure the Trimmer is switched OFF
and disconnected from the electrical outlet.
Remove the comb from Trimmer.
EJ Blow and/or shake out any hair that may
have accumulated in the comb.
E] Clean the comb and appliance with the
supplied cleaning brush or a dry, soft cloth.
E Remove beard trimmer attachment from
Trimmer handle.
[E Rinse beard trimmer attachment only
thoroughly under warm tap water (fig. 6).
Never rinse beard trimmer attachment still
attached to Trimmer handle.
Shake excess water from attachment and
allow to air dry thoroughly (fig. 7).
EJ Place the beard trimmer attachment back on
the Trimmer.
This Trimmer has no other
user-serviceable parts.
For
assistan
il 1-800-243-
Advertisement
