Technics SL-XP600 Operating Instructions Manual page 7

To repeat a particular section
(A-B repeat) _
(Available only from the wireless remote
controller)
1 Press A-B during play at the
point where repeat play is to be
started (point A).
(
3
]
2 Press A-B at the point where re¬
peat play is to be ended (point
B).
To cancel the A-B repeat
Normal play is restored when A-B is pressed
again.
Note
A-B repeat play is not possible during pro¬
gram play or random play.
Music scan play__
(Available only from the wireless remote
controller)
Allows you to listen to the beginning portion
(intro) of the tracks of a CD for 15 seconds
each, in order.
This is useful when playing discs inside a
car.
Preparation:
Set the unit to the stop mode. (See page 4.)
Press M.SCAN.
3 nn I
Ji u u I
After the beginning portion (15 seconds) of
every tracks has been played, normal play¬
back begins starting with the first track.
To return to normal playback dur¬
ing intro playback
During playback of the intro of the desired
track,press HI'
(The unit returns to normal playback.)
Extra Anti-Shock Function
This function minimizes sound interruptions
due to vibration when listening to a disc while
walking about or in a moving vehicle or train.
M.RESERVE indicator
Once the extra anti-shock function has been
activated, play data of up to 10 seconds can
be stored In the memory.
Therefore, even if the unit sustains an exter¬
nal impact, the data stored In the memory Is
sent to minimize sound interruptions during
play.
1 Set EXTRA ANTI-SHOCK to ON.
2 Press Hl<
The function starts to store the play
data, and the M.RESERVE indicator on
the display shows how much data Is
stored.
Notes
•The EXTRA ANTI-SHOCK can be set dur¬
ing play but doing so will produce a slight
gap in the sound due to a change in the
disc speed.
•While the extra anti-shock function is on,
the life span of the batteries is shortened
and sound made by the rotation of the disc
increases somewhat because the disc ro¬
tates faster and the play data is stored.
M.RESEnVE mode
Unit mode Play mode (play data mode)
Stable.
Sound is heard (sufficiet data has
been stored).
Unit sustains a shock.
Sound is heard (stored data is used).
Shock subsides.
Sound is heard (data storage
commences).
■Ml
1
Unit sustains
continuous shocks.
Sound is interrupted (no more data
is stored).
Listening to sound with the unit connected to an audio system
The extra anti-shock function incorporates digital signal compression technology. When listen¬
ing to sound with the unit connected to an audio system at home, it is recommended that the
extra anti-shock switch be set to the OFF position.
!?■
l<.
!■