Technics SL-XP600 Operating Instructions Manual page 5

Table of Contents

Advertisement

Sequential Play
Basic piay
1
Release the hold mode.
.2
Press OPEN to open the lid, and insert the
disc.
Labe! must face upward.
^ Close the lid.
Press the^rea near the center'
bole of the disc until it clicks
-
into position.
3
Set MODE to NORMAL.
NORMM.
RESHMEi iHBAWDDM
I iOQiOOr
4
Connect the stereo earphones
^
with remote controller to the C
•-
■ ' Jack;;'!';,;
-''/v',
'V-'-V-*''
stops
fiutomatlciitiy
When
all thdtraoksi'have been piByad ,,
'f'*
^
^
'
'
'
'
>
v"'-
'
Olspiayr
Pause:
Press during play/press again to resume play
To stop play:
Press during piay taop mo~del
To turn off the unft:
Press during stop mode I Off model
Skip foward/backward (skip function):
Press during play
Rapid foward/backward (search function):
Keep depressed during play
Forward
direction
Backward
direction
For your reference:
Backlight
The backlight comes on to illuminate the display panei when the unit is used with the AC
adaptor or a car adaptor (not included). The backlight will also come to illuminate the display
panel for about 5 seconds if any function button (except OPEN) is pressed when the HOLD
mode has been released and the unit is being operated with its batteries.
''no disc"
display
This appears for about 30 seconds when a disc has not been inserted or when a disc has not
been inserted propeily'and then
Bl is pressed.
"/?P£,r' display
This appears for about 10 minutes after the lid is opened, (it does not appear when the unit is
turned off.)
Skip and search functions
• During program play the tracks are skipped
In the forward or backward direction In the
programmed sequence.
•During program play, random play or
1-track repeat play, only the track being
played Is searched.
•During random play, it is not possible to
skip to the track which has already been
played.
Removing the disc
After the disc has stopped rotating, press
PUSH and release the disc. (Do not open the
lid during play.)
Do not put anything
inside the unit.
Automatic Shut-OFF function
When the unit is left for about 10 minutes
in the stop or pause mode, this function
automatically shuts off the power in order
to prevent the batteries, etc. from dis¬
charging needlessly.

Advertisement

Table of Contents
loading

Table of Contents