Setting Up Your System - Lifeline ASSURE User Manual

SETTING UP YOUR SYSTEM

Set up your communicator in a centrally
located place in your home. This allows the
two-way communication between you and
the operator to work most effectively.
1 Plug the power cube
outlet that is not controlled by
a light switch.
2 Slide the ON/OFF switch on the bottom of
the communicator to the "ON" position.
The green light on the top of the device will
flash until cellular service is acquired.
3 When the system is ready, you will hear
the welcome message and voice prompts
will assist you through setup.
4 When prompted press and release your Personal HELP
Button. You will hear a tone, and the
will flash. Your system will announce,
HELP bar
Emergency Response Center now. To cancel this call, please
press the HELP Bar now".
speak to the Emergency Response Center.
THE WELCOME MESSAGE WILL CONTINUE
TO PLAY UNTIL SETUP IS COMPLETE.
4
into an electrical
BLUE
Do not cancel the call. Wait to
ON/OFF
BUTTON
light on the
"Dialing the