GEYA GPS8-05 Instruction Manual

Voltage / Current Protector GPS8-05
Instruction Manual
Technical parameters
Function
Rated supply voltage
Rated supply frequency
Operation voltage range
Rated operational current
Burden
Over voltage operation value
Under voltage operation value
Over/under voltage action delay
Over current operation value
Over current action delay
Power-up delay
Reset time
Measurement error
Electrical life(AC1)
Mechanical life
Operating temperature
Storage temperature
Mounting/DIN rail
Protection degree
Operating position
Overvoltage cathegory
Pollution degree
Dimensions
Weight
Parameter setting
Parameter
Over voltage value
Over voltage recovery value
Under voltage value
Under voltage recovery value
Voltage fault action time
Over current value
Over current action delay
Power on delay time
Reset time
Fault reset
LCD backlight time
NOTE:
In the power off state, press and hold
to restore the factory settings.
General
GPS8-05
Over voltage, under voltage and over current
AC220V(L-N)
45~65Hz
80V~400V(L-N)
32A,40A,50A,63A,80A（AC1）
AC max.3VA
OFF,230V~300V
140V~210V,OFF
0.1s~10s
1~32A,40A,50A,63A,80A
2s~600s
2s~600s
2s~900s
≤1%
4
1×10
1×10
-20℃ ~ +60℃
-35℃ ~ +75℃
Din rail EN/IEC 60715
IP40 for front panel/IP20 terminals
any
× ×
82 36 68mm
135g
Range Step value
OFF,230V~300V 1V
225V~295V 1V
140V~210V,OFF 1V
145V~215V 1V
0.1s~10s 0.1s
OFF,1A~32/40/50/63A 0.1A
2s~600s 1s
2s~600s 1s
2s~900s 1s
ON-OFF
10s~900s,ON
1s
, and then power on again
Applications
-Overvoltage ,undervoltage and overcurrent protection for household
equipment.
Function Features
-Voltage / current monitoring and protection.
-Special metering chips are used to detect voltage, current, electricity, and power.
-Double bus wiring design stronger ability.
-Over / under voltage value and over-current value can be set.
-Self reset after fault.
-Digital display voltage, current value, fault status can be displayed by LED.
-1-MODULE,DIN rail mounting.
Model and connotation
GPS8 05
Incoming line mode
U:upper incoming line
D:lower incoming line
Design number
GPS8 Series
Panel Diagram
Over voltage indicator
Under voltage indicator
Over current indicator
Power open and close
indicator
M
Functions Diagram
U
LED:
LED: >U
LED: <U
Factory settings
275V
265V
175V
180V
0.5s
32A/40/50/63A
5s
5s
30s
ON
Tp：Power-up delay(2~600s)
Tr：Reset delay time(2~900s)
60s
Tu：Over/under voltage fault action time(0.1~10s)
Tc：Overcurrent fault action time(2~600s)
-1-
GEYA ELECTRICAL CO.,LTD
Add:Wenzhou Brige Industrial Zone,Beibaixiang Town,
Yueqing,Zhejiang,China 325603
Mobile:0086-13567770207
E-mail:sale@cngeya.com
Web:www.geya.net
>U
<U
>I
M
Press and hold the setting key for 3 seconds to enter the
setting. After modifying the setting, press and hold for 3
seconds to save the setting.
Used to increase the value when setting parameters.
1.Used to reduce the value when setting parameters.
2.After exiting the setting, it can be used to manually turn
on or off the load.
3.If the automatic fault reset function is turned off, this button
can be used for manual reset when the fault occurs.
Tp
Tu Tr Tu
I>
I
LED:
LED: >I
Tp Tc
Tr
Operating voltage value
Operating current value
Tr
<Tu <Tu