Table of Contents
Advertisement
NN-6207, NN-6307, NN-6407
NN-6507, NN-6567, NN-6607, NN-6757
NN-6707, NN-6807
OPERATION
Remove hot water load and replace with
a cold water load.
Put sensor probe into the water load and
connect the sensor probe jack into its re-
ceptacle.
NOTE: Sensor probe must be put into
water more than one inch.
pS
uncTiON
DISPLAY
« Temperature Probe Cooking indicator lights turn on.
TEMP
Ht
Clock time disappears.
Tap Power Pad once
* High power indicator light turns on.
» Selected temperature "120F" appears in the display window.
Tap Temp Probe Pad three times
* High power indicator light starts blinking.
¢ Oven lamp and fan motor turn on.
* Microwave activity starts.
¢ Current temperature of water is displayed in rising 5°F increments
starting at 90°F.
NOTE: If starting temperature is lower than 90°F, "LOOF" (meaning
lower than 90°F) will be displayed until water temperature
reaches 90°F.
Tap Start Pad
When water temperature is reached to 120°F:
Oven beeps five times and shuts off.
« TOD reappears in the display window.
oven the receptacle.
Advertisement
Table of Contents
