Taiwan Main Orthopaedic
Biotechnology Co., Ltd.
Copyright © 2023, Taiwan Main Orthopaedic
Biotechnology, Co,. Ltd. All Rights Reserved.
Abc
Human Anatomy
Copyright © 2018, Taiwan Main Orthopaedic Biotechnology, Co,. Ltd. All Rights Reserved.
Quick Setup Guide
Boot and process teaching
Host Switch
Radiology
The first step
Insert the power cord plug into the socket.
The second step
Insert the other end of the power cord into the
power socket on the side of the dissection table.
The third step
Turn on the power switch of the dissection table to
1.
The fourth step
Switch the power switch of the dissection table to
start the dissection table. At this time, the dissec-
tion table will have a turning on sound, which
represents the dissection table is starting the
operation.
The fifth step
The screen will light up after the dissection table is
turned on. If there is no signal on the screen,
please be patient and wait a few seconds. The
following screen (As shown in figure) will be
displayed.
The sixth step
When this screen appears (As shown in figure), it
means that the boot is complete.
Need help?
Do you have a question about the Asclepius and is the answer not in the manual?
Questions and answers