Troubleshooting - Panasonic KX-TS105W Operating Instructions Manual

Integrated telephone system
Table of Contents

Advertisement

Troubleshooting
>
Problem
The unit does not work.
The unit does not ring.
You cannot dial.
The other party suddenly
cannot hear your voice
during a conversation.
You cannot program items
such as the dialing mode.
You cannot store a phone
number in memory.
While programming, the
unit starts to ring and stops
the program.
You cannot redial by
pressing (REDIAL ) .
Remedy
eCheck the settings (p. 5-9).
e Remove the batteries and reinstall
them to reset the unit.
eThe RINGER selector is set to OFF.
Set to HIGH or LOW (p. 8).
eCheck that the dialing mode selection
is correct (p. 8).
® Dial lock mode is set. To cancel the
mode, see page 20.
eThe dialed number is restricted. To
cancel, see page 21.
(MUTE)
may have been pressed during
the conversation. Press
(MUTE).
eProgramming is not possible when a
call is put on hold.
e Do not pause for over 60 seconds
while programming.
e Programming is not possible when a
call is put on hold.
eCheck that the batteries are installed in
the unit and that the battery power is
not low.
eDo not enter a phone number more
than 22 digits long.
eWhen using the Dial Lock (p. 20) or
Cali Restriction feature (p. 21), you
cannot store a phone number in the
EMERGENCY
button.
eTo answer the call, lift the handset or
press
(SP-PHONE/HEADSET). Start
again from the beginning after hanging
up.
elf the last number dialed was more
than 32 digits long, the number will not
be redialed correctly.
VOHBU
For assistance, please call: 1-800-211-PANA(7262)
25

Advertisement

Table of Contents
loading

Table of Contents