Table of Contents
Advertisement
Graphic equalizer
EQ. REC key
DISPLAY key
KENWOOD
stereo INTEGRATED AMPLIFIER KA-128
VOLUME CONTROL
nm
.
CD DIRECT
=
DISPLAY
oo,
6
Oe
C3
# in & 8% AY
EGP. METER
TAPE 2IMONITOR)
TAPE 1
VIDEO 2
VIDEO 1/AUX)
ON/STAND BY
FURL FUNCTION REMOTE COMTAOK
EQUALIZER MEMORY PRESETS
ENTER key
Graphic equalizer control keys
ON/DEFEAT key
CALL key
MEMORY
key
@ How to apply the equalizer effect to the sound
@ How to store the graphic equalizer patterns
1. Press the ON/DEFEAT key.
This unit allows you to store up to 5 equalizer patterns in
® The EQUALIZER
indicator lights up.
memory for instant recall.
1. Press the DISPLAY key to set the display to the graphic
2. By pressing each of the 7-band equalizer level control
equalizer mode.
keys, create the equalizer pattern which provides the
desired tone.
2. Adjust the GRAPHIC EQUALIZER control keys to obtain
® Pressing the upper segment of an equalizer level con-
the desired equalizer pattern.
trol key increases the level of the frequency band in
+2 dB increments up to + 12 dB.
3. Press the MEMORY key. The MEMORY indicator lights
® Pressing the lower segment of an equalizer level control
up in the display.
key decreases the level of the frequency band in —2 dB
decrements down to — 12 dB.
4. Within approx. 5 seconds after pressing the MEMORY
© For reference in creating desired tones, read ''Function
key, press the CALL key to select the desired equalizer
of the graphic equalizer' and ''Sound equalization'' sec-
channel (EQ-1 to EQ-5) in which you want to store the
tions on page 14.
equalized pattern.
@ If up to 5 equalizer patterns have already been preset
in the memory,
they can be recalled in sequence by
5. Press the ENTER key to store the equalized pattern in
pressing the CALL key.
memory.
6. To recall a preset equalizer pattern which has already
been stored, press the CALL key.
Power meter display
@ Display window
Power meter display:
To display, press the DISPLAY switch to change the dis-
play to the power meter mode.
It displays the output level for each channel
of program
source signal selected by the input selector Keys.
@ The levels vary according to the input signal.
Graphic equalizer display:
Press the DISPLAY key to change the displayto the graph-
:
a
ic equalizer mode.
:
Even while the spectrum analyzer display mice is activat-
ed, the display enters the graphic equalizer mode for ap-
prox. 5 seconds in the following cases:
. When the POWER key is turned ON.
2. When any of the GRAPHIC EQUALIZER cintrol keys is
Equalizer pattern
When the CALL key is pressed, the
pressed.
recalled preset channel No. is dis-
. When the MEMORY
key is pressed.
played for a few seconds.
. When the CALL key is pressed.
In these cases, the spectrum analyzer display will resurne
approx. 5 seconds later.
Graphic equalizer display
_
Pw
\A-128 (En) 13
Advertisement
Table of Contents
