Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
1. Display
TV Guide
2. Select the forthcoming programme and press
3. Select
Record
and press
You can also set a timer event pressing
●
To check / change / cancel a timer event
●
Recording > Timer Programming > Editing Timer Programming
LED lights orange in Standby mode when
●
To return to
TV Guide
●
BACK
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
the time you finish the timer event setting. (Ireland only)
is displayed on the TV Guide screen when
●
set. (Ireland only)
is displayed on the TV Guide screen when
●
set. (UK only)
= Note =
Not valid in Analogue
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording > USB HDD setup
with GUIDE.
OK
to set. (UK only)
and press
OK
only works reliably if correct time information is
USB Device
- 129 -
OK
to access.
.
Timer Programming
to set
USB HDD Rec.
Timer Programming
Timer Programming
Setup.
is set.
to record from
is
is