Table of Contents
Advertisement
Giapter 6
f.7/C0NT
SYNTAX:
CONT
FUNCTION:
Restarts the execution of a program that was previously stopped.
DESCRIPTION:
The
Key, Q
+ C Key, or the STOP statement in BASIC are
used to halt program execution.
Once stopped, investigation of a
possible error can
be achieved in the direct mode.
The CONT
command is then used to re-start (continue) the program.
The
program
will
resume
execution
where
the
halt
occurred.
To
continue program execution simply press the f.7 Key (Qjjj^and f.2)
or input "CONT" and then press the
Key.
The CONT command cannot be executed if the contents of the
program have been altered after the STOP occurred.
6-17
Advertisement
Table of Contents
