Table of Contents
Advertisement
Transmit
Frequency
Range:
Excitation Energy Required:
Mode and Duty Cycle:
Rated Plate Input:
Plate Voltage: (at No signal)
Circuit Type:
3rd Order Intermodulation Distortion:
Input Impedance:
Output Impedance:
Cooling:
Interlock Safety Features:
Thermal Protector:
Fan Motor Delay Stop Time:
ALC:
Power Tubes Used:
Semiconductors:
Power Requirements:
Cables Supplied:
Dimensions:
Weight:
sansa
-atnscnnctny tans ateesanntanectte satan
stances tate tanta
taintedeity
satan
TL-922A SPECIFICATIONS
sauicaap tt -ctacnastettttcn
att enact ta
anne
nnn santa sents caat an -ant-atto
160m
through
15m
Amateur Bands
80 W nominal, 120 W maximum
SSB, continuous for 30 minutes.
CW and RTTY, key-down continuous for 10 minutes.
2 kW P.E.P. SSB, 1 kW CW RTTY
3.1 kV SSB, 2.2 kV CW RTTY
Class AB2 grounded grid linear amplifier
Below —30dB.
50 2, unbalanced at better than 1.5 SWR
50 to 75 2, unbalanced.
Forced Air.
Primary high voltage circuit cut-off.
Secondary high-voltage circuit grounding.
Locks out transmit relays if H.V. power transformer overheats.
140 + 30 seconds.
(at room temperature)
Negative going, adjustable threshold -8V DC maximum output (typical).
Eimac 3-500Z, two pieces
Diodes, 18 pieces
Zener diode, 1 piece
120V, 28A; 240V, 14A; 50/60Hz; for maximum SSB input.
Signal cable (coaxial) with UHF-type
connector, 1.5m.
Control cable, 1.5m.
390mm x 190mm
x 407 mm (15-3/8 x 7-1/2 x 16")
Net 31 kg (68 Ibs.)
Shipping 38 kg (83 Ibs.)
The above specifications are subject to change without notice due to technical im-
provement.
Advertisement
Table of Contents
