Kapitola 4. Konfigurácia Rozšírených Nastavení; Uefi Bios Setup Utility; Enter The Uefi Bios Setup Utility; Change The Startup Sequence - Lenovo 13w Yoga Manual

Kapitola 4. Konfigurácia rozšírených nastavení

UEFI BIOS setup utility

UEFI BIOS setup utility is the first program that the computer runs. When the computer turns on,
UEFI BIOS setup utility performs a self test to make sure that various devices in the computer are
functioning.

Enter the UEFI BIOS setup utility

Restart the computer. When the logo screen is displayed, press F2 to enter the UEFI BIOS setup
utility.

Change the startup sequence

You might need to change the startup sequence to allow the computer to start from another device
or a network location.
1. Enter the setup utility.
2. Navigate to the Boot menu.
3. Follow the on-screen instructions to change the order of devices under Boot Priority Order.
Poznámka: You can also change the startup sequence temporarily without opening the setup utility.
To do so, start the computer. When the logo screen is displayed, press F12.
Zmena režimu klávesových skratiek
1. Spustite program Setup Utility.
2. Vyberte položky Configuration ➙ Hotkey Mode a stlačte Enter.
3. Zmeňte nastavenie na možnosť Disabled alebo Enabled.
4. Vyberte položky Exit ➙ Exit Saving Changes.

Enable or disable the Always On USB function

For computer models with the Always On USB connector, the always-on function can be enabled or
disabled in the setup utility.
1. Open the setup utility.
2. Select Configuration ➙ Always On USB and press Enter.
3. Change the setting to Disabled or Enabled.
4. Select Exit ➙ Exit Saving Changes.
Používanie hesiel
Táto časť obsahuje informácie o typoch hesiel, ktoré môžete nastaviť v programe Setup Utility.

Password types

You can set various types of passwords in the UEFI BIOS setup utility.
Poznámky:
© Copyright Lenovo 2022
19