Advertisement
Important safety instructions
1. To obtain full use of the cabinet, we recommend reading this instruction manual.
2. It is the user's responsibility to operate the appliance in accordance with the instructions
given.
3. Contact your dealer immediately in case of any malfunctions.
4. Place the cabinet in a dry and ventilated place.
5. Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct
sunlight.
6. Always keep in mind that all electrical devices are sources of potential danger.
7. Do not store flammable material such as thinner, gasoline, etc., in the cabinet.
8. We declare that no asbestos nor any CFC are used in the construction.
9. The oil in the compressor does not contain PCB.
Unpacking and installation
Remove the wooden pallet and the packing. External surfaces are supplied with a protection
foil, which must be removed before installation. To ensure correct function it is important that
the cabinet is level.
The cabinet is supplied with legs, these can be adjusted. See Fig. 1.1.
lf you want to build in your cabinet please note the following:
• There must be at least 15cm free space above the cabinet in order for the cooling system
to work satisfactorily.
• There must be sufficient space at the hinge side to clean and replace the shelves and
clean around the hinge.
DISTRIBUTED BY:
Fig 1.1
3
SOUTHERN
p: 0800 503 335 | w: www.southernhospitality.co.nz
HOSPITALITY
e: weborders@southernhospitality.co.nz
Advertisement
