Advertisement
should be powered on but waiting in the Welcome Screen.
Plug the router or access point into the network and plug it in to power. The router or access point will boot and receive
a valid IP address from the DHCP server to communicate on the lighting network.
Start the console software. In most systems, this means launching as Primary or Server.
Connect Your Wireless Device
Connect to the new wireless network as you would any other WiFi network.
Android
• Click on the Settings icon
• Choose Wi-Fi
• Click on your network to connect. If you have enabled a passphrase, enter it when prompted.
iOS
• Click on the Settings icon
• Choose Wi-Fi
• Click on your network to connect. If you have enabled a passphrase, enter it when prompted.
The device will connect and acquire a DHCP address from the router. If using an access point, the console or Net3
Conductor appliance will supply an address through the access point.
Configure the iRFR or aRFR Application
iRFR or aRFR full version is not compatable with Cobalt consoles.
https://support.etcconnect.com/ETC/Consoles/Console_Apps/How_to_Set_Up_Your_Wireless_Network_for_iRFR_or_aRFR_...
Updated: Tue, 03 Oct 2023 07:16:35 GMT
Powered by
8
Advertisement
