ETC EOS Series Manual page 2

How to set up your wireless network for irfr or arfr

Existing Network with a Router

Connect the router's WAN port to a core switch in your system. If two switch ports are not available next to the console,

ETC recommends installing a small unmanaged switch between the console, wall port, and router. The goal is to keep

the router from being a point of failure for show-critical level information like sACN, EDMX, or ArtNet data. The switch

will provide access to the network while not placing the router in-line.

Existing Network with an Access Point

Connect the access point to your core switch in the system. If another switch port is not available in the location where

you want to set up the router, ETC recommends installing a small unmanaged 5-port switch. The goal is to have the

router not between the console and the main network, in particular its show-critical level information like sACN, EDMX,

or ArtNet data.

https://support.etcconnect.com/ETC/Consoles/Console_Apps/How_to_Set_Up_Your_Wireless_Network_for_iRFR_or_aRFR_...

Updated: Tue, 03 Oct 2023 07:16:35 GMT