Safety Information - Fluke LIQ-Battery Instructions

LIQ-Battery
Instructions

Safety Information

A Warning identifies hazardous conditions and procedures that are
dangerous to the user. A Caution identifies conditions and procedures
that can cause damage to the Product or the equipment under test.
To prevent possible electrical shock, fire, or personal injury:
Read all safety information before you use the Battery.

Do not alter the Battery and use only as specified, or the

protection supplied by the Battery can be compromised.
Carefully read all instructions.

Do not use the Battery if it operates incorrectly.

Do not use the Battery around explosive gas, vapor, or in

damp or wet environments.
Use only specified replacement parts.

Use only the mains power cord and connector approved for

the voltage and plug configuration in your country and rated
for the Product.
Use only Fluke approved power adapters to charge the

battery.
Disconnect the ac adapter before you remove the Product

covers.
Do not use the Battery if it is altered or damaged.

Batteries contain hazardous chemicals that can cause burns

or explode. If exposure to chemicals occurs, clean with water
and get medical aid.
Repair the Product before use if the battery leaks. Battery

leakage may create a shock hazard or damage the Product.
Remove the batteries if the Product is not used for an

extended period of time, or if stored in temperatures above
50 °C. If the batteries are not removed, battery leakage may
result.
2
 Warning