Advertisement
Model:
T-49DT-G
STANDARD FEATURES
DESIGN
• True's glass door reach-in's are designed with
enduring quality that protects your long term
investment.
• True's commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today's food
service marketplace.
REFRIGERATION SYSTEM
• Equipped with two, independent, factory
engineered, self-contained, capillary tube
refrigeration systems using environmentally
friendly (CFC free) refrigerant. Refrigerator
uses 134A and freezer uses R404A.
• Refrigerator located in left section; freezer in
the right.
• Extra large evaporator coils balanced
with higher horsepower compressors
and large condensers; maintain colder
standard temperatures for the best in food
preservation. Refrigerator holds 33°F to 38°F
(.5°C to 3.3°C); freezers holds -10°F (-23.3°C).
• Sealed, cast iron, self-lubricating evaporator
fan motors and larger fan blades give True
reach-in's a more effi cient low velocity, high
volume airfl ow design. This unique design
insures faster temperature recovery and
shorter run times in the busiest of foodservice
environments.
• Bottom mounted condensing unit positioned
for easy cleaning. Compressor runs in coolest
and most grease free area of the kitchen.
Allows for storage area on top of unit.
• Automatic defrost system time-initiated,
temperature-terminated. Saves energy
consumption and provides shortest possible
defrost cycle.
PLAN VIEW
76
/
15
16
(1955 mm)
83
5
/
"
16
(2117 mm)
1
3
/
"
8
(35 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
DT Series:
Reach-In Dual Temperature Glass Door
Refrigerator/Freezer
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front grill
and shroud. Anodized quality aluminum
exterior ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor with
coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 4" (102 mm) diameter
stem castors - locks provided on front set.
DOORS
• "Low-E", double pane thermal glass assembly
in refrigerator door. Triple pane thermal glass
assembly in freezer door.
• Extruded aluminum frames. Door locks
standard.
• Each door fi tted with 15" (381 mm) long
extruded aluminum handle.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves 22
Four (4) chrome plated shelf clips included per
shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
1
/
" (13 mm) increments.
2
LIGHTING
• Fluorescent interior lighting. Each door
utilizes full-length, patented, integrated door
light (IDL) system. Safety shielded.
"
ELEVATION
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
7
1
/
"L X 23
/
"D (582 mm x 591 mm).
8
4
78
5
/
"
31
/
"
3
16
32
(1990 mm)
(790 mm)
5"
(127 mm)
Model
KCL
T-49DT-G
MODEL FEATURES
• Two (2) exterior mounted temperature
monitors, one for refrigerator section and one
for freezer section.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• Rear airfl ow guards prevent product from
blocking optimal airfl ow.
• NSF-7 compliant for open food products.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a
115/208-230/60 Hz, single phase, 3 pole, 4 wire
- 20 amp dedicated outlet. Cord and plug set
included.
115/208-230/1
NEMA-14-20R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ Additional shelves.
❒ Novelty baskets.
❒ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately) (airfl ow guard needs to
be removed from freezer).
❒ Full door bun tray racks. Each holds up to
twenty-two 18"L x 26"D (458 mm x 661 mm
sheet pans (sold separately) (airfl ow guard
needs to be removed from freezer).
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refi gerant). Consult factory technical service
deptartment for BTU information.
54
/
"
1
8
(1375 mm)
29
/
"
23
32
(755 mm)
1
/
"
3
8
(35 mm)
PLAN VIEW
Elevation
Right
TFEY67E
TFEY07S
"
54
15
/
16
(1396 mm)
25
7
/
"
16
(647 mm)
Plan
3D
TFEY07P
TFEY673
Advertisement
