3. ACCESSORIES & CARTON CONTENTS
AVAILABLE ACCESSORIES
Use only accessories recommended for this electric hammer chisel. Follow instructions
that accompany accessories. Use of improper accessories may cause injury to the opera-
tor or damage to the cordless drill.
Do not use any accessory unless you have completely read the instructions or Owner's
Manual for that accessory.
• Various chisels
CARTON CONTENTS
If any part is missing or damaged, do not plug the chisel into the power source until the
missing or damaged part is replaced.
Carefully unpack the tools see "Components chart" at right hand side of this page
NOTE: See illustration of components on Page 9.
To avoid re or toxic reaction, never use gasoline, naphtha, acetone, lacquer thinners or
similar highly volatile solvents to clean the tool.
KEY
DESCRIPTION
A
Rotary hammer
B
Chisels
C
Drill bits
D
Oil key
E
Carry case
4. ASSEMBLY & OPERATION
Always make sure the power tool is isolated from the power supply before tting any
attachment
Handle. See (Fig 1)
Always make sure the xed handle is secure before any job takes place as a loose handle
could invite injuries.
Fig 1
Switching the chisel on/off
The chisel has an On/Off switch (Fig 2) built in to the handle. Holding the chisel with both
hands simply squeeze the trigger and the motor will start. To switch off release the trigger.
QTY
1
2
3
1
1
10