Advertisement
Quick Links
USER MANUAL - DCUSBBO-7
DOUBLE USB CHARGER
Specification of DCUSBBO-7 double USB charger
The DCUSBBO-7 charger is intended to charge devices like smartphones, tablets and other electronic
equipment. Before connecting the device, check compliance of the charger with charging
parameters of the given device.
Dane techniczne
Number of USB ports (type C)
Nominal input voltage
Nominal output current
Maximum output power
Maximum power consumption in idle mode
Operating temperature and humidity
Storage temperature and humidity
Ingress protection degree
67,20
2
100-240 V~ 50/60Hz
5V/3A, 9V/2.22A, 12V/1.67A (when device is
ź
connected to only one USB output)
5V/3.1A (in the case of connecting devices to
ź
two outputs, the output current is divided
equally between each USB socket)
20 W
0.1 W
0
-10 ÷ +40 C; 20~90% RH
0
-20 ÷ +85 C; 10~95% RH
IP 20
41,00
1 I 3
Advertisement
Related Manuals for Karlik DCUSBBO-7
Summary of Contents for Karlik DCUSBBO-7
- Page 1 DOUBLE USB CHARGER Specification of DCUSBBO-7 double USB charger The DCUSBBO-7 charger is intended to charge devices like smartphones, tablets and other electronic equipment. Before connecting the device, check compliance of the charger with charging parameters of the given device.
- Page 2 QC 3.0 Warranty conditions Warranty is granted for a period of 12 months of the date of purchase. The defective DCUSBBO-7 charger along with the proof of purchase should be sent to the manufacturer or to the seller. Warranty does not include mechanical damages, defects resulting from unauthorised repairs and improper use of the product.
- Page 3 ASSEMBLY INSTRUCTIONS 1. Remove the adapter (2) of the charger by levering it with a knife or a flat screwdriver in the place of the recess (1) on the adapter. 2. Unscrew the screw (3) and pull out the adapter (4) together with the USB charger module (5). If necessary, you can detach the USB charger module from the adapter by pressing the movable catch on the module.