Karlik DCUSB-6 User Manual

Double usb charger

USER MANUAL - DCUSB-6

DOUBLE USB CHARGER

Specification of DCUSB-6 double USB charger

The DCUSB-6 charger is intended to charge devices like smartphones, MP3 players and other

electronic equipment. Before connecting the device, check compliance of the charger with

charging parameters of the given device.

Specification

Number of USB ports (type A)

Nominal input voltage

Nominal input current

Nominal output voltage

Nominal output current

Ingress protection degree

Warranty is granted for a period of 12 months of the date of purchase. The defective DCUSB-6 charger

along with the proof of purchase should be sent to the manufacturer or to the seller. Warranty does not

include mechanical damages, defects resulting from unauthorised repairs and improper use of the

product.

Warranty period will be extended for the duration of the repair.

67,20

100-240V AC; 50/60Hz

0,25 A

5 V DC

3.1 A (

total value for the whole mechanism

IP 20

41,00

)

1 I 2

Table of Contents

Do you have a question about the DCUSB-6 and is the answer not in the manual?

Page 1 IP 20 Warranty conditions Warranty is granted for a period of 12 months of the date of purchase. The defective DCUSB-6 charger along with the proof of purchase should be sent to the manufacturer or to the seller. Warranty does not include mechanical damages, defects resulting from unauthorised repairs and improper use of the product.
Page 2 ASSEMBLY INSTRUCTIONS 1. Remove the glass panel (1) with the label applying a knife or a flat screwdriver in the recess (3). 2. Remove the screw (2). 3. Dismantle the USB charger modules (4). 4. Remove the spacer frame (5) from the assembly block (7). Pull away the block tabs or pull the frame tightly to do this.