Advertisement
6. "Reel, Disk" Removal
(See Figure-6)
1) Remove E-Ring (@) and poly washer (@)), then remove
the "Reel,
Cap",
"C-Spring,
Reel"
and "Reel
Disk
ASSY".
2) Remove poly vasher (©), "E-Spring, Brake" and then
the "S Brake Lever ASSY".
3) Remove the "T-Spring,
Soft" and then the "Sled Brake
Lever ASSY".
Note) Hook the "T-Spring,
Soft" as shown in the figure
when installing the "Sled Brake Lever ASSY".
4) Remove poly washer ((D)) and the "FR Gear ASSY".
5) Remove E-Ring (©) and poly sasher (®), then remove
the "Reel, Cap", "C~Spring, Reel" and "Reel, Disk
s",
6) Remove poly washer (@) and then the "T Brake Lever
ASSY"and "Gear, A FF".
@ ©8
db
|
—g
a
Reel,
Cap
C-Spring,
Ree!
Reei, Disk S
FR Gear sy
——
Oe
i
a
Sted Brake Lever ASSY
T-Spring,
Soft
o
ee
Cap
gerne
Ree!
:
Ree! Disk ASSY
&
Pu
©
on
E-Spring, Brake
®
T Brake Lever ASSY
ox
S Brake Lever ASSY
zy
Qe
A FF
Sled Brake
Lever ASSY
7. "Chassis,
Motd" and "Gear,
Sled" Removal
(See Figure-7)
1) While turning the "Worm Wheel" sith your fingers, move
the
"Shuttle
ASSY
S and
T" in the
direction
of
the
arrow.
(See Fig-7-1)
2) Remove screw (@)) and poly washer (@)), then remove
the "Chassis, Mold".
3) Remove "Gear, Sled G".
4) Remove poly washer (©)) and then "Gear, Sled 8".
Note) When instali "Gear, Sled H" and "Gear, Sled G" so
that the warks on each gear are aligned as showh
in
Fig-7-2.
Shuttle ASSY S
Shuttie ASSY T
Shuttle ASSY
Chassis,
Mold
Fig-7-1
Gear,
8. Position Alignment of Gears (See Figure~8)
1) Align the positions of "Gear, Sled H", "Gear, Sled G",
"Gear, Sled F", "Cam, A", "Cam, B" and "Mode Switch ASSY"
as shown in the figure.
&
t
Chassis,
Mold
Gear, Sled H
Gear, Sled G
®
Shuttle ASSY T
S
Gear, Sled 6
Gear, Sled H
Sled F
Fig-7
Fig-B
10
Advertisement
