Advertisement
"DISASSEMBLY INSTRUCTIONS — 2 (MECHANISM SECTION)
1. "Drum ASSY" and
"Sled Motor ASSY" Removal
2."Tension Regulator ASSY'
and "Rotier,
Guide" Removal
3. "Pinch Roller ASS
Reroval
4,"Chassis Sub ASSY"
Removal
§."Casptan Motor" Removal
6. "Reel, Disk" Removal
7. "Chassis, Mold" and
"Gear, Sled" Removal
1. "Drum ASSY" and "Sled Motor ASSY" Removal
(See Figure-1)
1) Remove 3 (@) screws and the "Drum ASSY".
Note) Align the components in sections A, B and C as shown
in the figure when attaching the "Drum ASSY",
2) Renove((®))scres and the "Sled Motor ASSY",
Note) Fix the "Sled Motor ASSY" with bond.
Sted Motor ASSY
Fix with bond
A: Boes not ride over.
B: Align with the drum base.
Fig-1
Advertisement
