Connecting Using An Optical Cable - Samsung HW-N400 Full Manual

2. "TV ARC" appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the
of the Soundbar to switch to "D.IN" mode. The screen displays "D.IN" and "TV ARC" in sequence,
and TV sound is played.
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the
cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTES
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
• Anynet+ must be turned on.
• This function is not available if the HDMI cable does not support ARC.

Connecting using an Optical Cable

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
2. Press the (Source) button on the right side panel or remote control, and then select the "D.IN"
mode.
(Source) button on the remote control or on the right side
Optical Cable
OPTICAL OUT
(not supplied)
ENG - 7
Bottom of the Soundbar

D.IN
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)

Right Side of the Soundbar