1 Important 2 Your Docking Speaker Introduction What's in the box Overview of the main unit 3 Get started Connect power Set time format Adjust display brightness 4 Play Play from iPod/iPhone Play from Bluetooth device Play from an external audio device Adjust volume 5 Product information Specifications ...
1 Important • Read these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that ...
Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
Overview of the main unit • In iPod/iPhone mode, start or pause play. • Adjust display brightness. • Set 12 or 24 hour format. c Display panel d Dock for iPod/iPhone • Enable or disable Bluetooth function. • Adjust volume. • ...
Always follow the instructions in this chapter in sequence. Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
• Different devices may have different way to activate Bluetooth. Scan Bluetooth devices that can pair with your device. When “AD752” is displayed on your device, select it to start connection. » If connection is successful, you will hear double beep confirmation tone, and ...
Play audio on your device. » Audio streams from your device to the docking speaker. • If your Bluetooth device has been paired with AD752 before, you just need to find out “AD752” on your Bluetooth menu, then confirm the connection. To disconnect Bluetooth: • Press again; • Deactivate Bluetooth function on your device;...
10 W per channel x 2 > 62 dBA 650 mV RMS 4 ohm 2 5” General information AC Power Model: AS190-100- AI180 (Philips); Input: 100-240 V ~, 50/60Hz, 0.7A; Output: 10 V Operation Power 15 W Consumption Standby Power <1 W...
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.