Options - BPE PS50 Series User Manual

No Alarm Cord UPS Alarm Warning
26 14B
27 14C
28 14E
29 162
30 14F
31 163
32 150
33 164
34 151
35 161
36 165
37 166

4.5 Options

Network Management Card with Environmental Monitoring
CAUTION!
For network management configuration and use, refer to the separate user
manual - Network Management Card with Environmental Monitor - shipped with the
.
CARD
Network Management Card replacement
SNMP card: internal SNMP / external SNMP optional
◆ Loosen the 2 torque screws (on each side of the card) .
◆ Carefully pull out the card. Reverse the procedure for re-installation
The slot called SNMP supports the MEGAtec protocol. We advise that NetAgent II-3 port is
also a tool to remotely monitor and manage any UPS system
NetAgent II-3Ports supports the Modem Dial-in (PPP) function to enable the remote control
via the internet when the network is unavailable.
In addition to the features of a standard NetAgent Mini, NetAgent II has the option to add
NetFeeler Lite to detect temperature, humidity, smoke and security sensors. Thus, making
NetAgent II a versatile management tool. NetAgent II also supports multiple languages and is
setup for web-based auto language detection.
ECU Par. cable abnormal
ECU Abnormal
BPS Phase Reversed
BPS Unable To Trace
BPS Not Available
Ecu Set Data Err
BPS Par.cable abnormal
Bypass Comm. Error
Bypass module take over Once per 2 seconds
The overview of the SNMP card
Typical topology of the UPS Network Management
Buzzer
Once per 2 seconds
Once per 2 seconds
Once per second
Once per second
Once per 2 seconds
Once per 2 seconds
Once per second
Once per second
Once per 2 seconds
Once per 2 seconds
Once per 2 seconds
73
LED
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit
Alarm LED lit