Elite Screens Tripod Tab-Tension CLR 2 Series User Manual

Thank you for choosing the Tripod Tab-Tension CLR® 2 projection screen! This tab-tensioned tripod pull-up
screen is best for rooms with minimal control of overhead room lighting. It utilizes our ISF Certified CLR® 2 front
projection ceiling ambient light rejecting material. It is precisely formulated to increase brightness, produce accurate
colors, and improve contrast. The CLR® 2 is best for family rooms, educational facilities, conference rooms, house
of worship or any applications in which incident light is a factor.
Compatible only with ultra-short and short-throw projectors.
In order for the CLR® 2 to maintain its projection qualities and optimum performance please refer to the list below
for proper maintenance and cleaning.
• Use a dry microfiber cloth to remove dust from the screen's surface.
• When cleaning, use a damp microfiber cloth with warm water to remove any marks.
• Never rub or apply pressure when cleaning the surface.
• Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.
• To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other
sharp or abrasive objects.
Please be sure to read the precautions and operating instructions carefully before operating the screen. Proper
maintenance and handling will ensure a longer lifespan for the product.

Tripod Screen Parts Identification

Support beam
Vertical
Extension Bar
Screen Material
End cap
Screen case
Tripod drape skirt
Rev.083023JA
Tripod Tab-Tension CLR® 2 Series
Portable Ceiling Ambient Light Rejecting Projector Screen
For Ultra-short and Short-throw Projectors Only
wwww.elitescreens.com
USER'S GUIDE – M Type
Top hook and
Screen Handle
Vertical locking
Carrying handle & Screen height
adjustment lock/release tab
Tripod junction
Tripod Support leg
U00262
V1.0
1