Table of Contents
Advertisement
a
Basic
Operation
Ku
European model
OV
{f your TV is already hooked up to a VCR, you can
connect the camera to the VCR instead of the TV.
Follow the instructions on p. 14 or 15.
To connect the camera directly to a TV which does
not have audio/video terminals, you will need to
use the optional RU-100 RF Unit. The soundtrack
will be in mono. There are two different models,
one for Australia, and one for Europe and other
areas.
Connecting the RF unit
Male Female
pS
CHBK )
A
Coaxial cable with DIN-
=
Ls
connectors
e.
ze
1. Connect the RF unit to the camera.
2. Connect the aerial cable to the FROM
ANT. terminal on the RF unit.
3. Connect the "female" DIN-connector on
the coaxial cable to the TO TV terminal
on the RF unit.
4. Connect the "male" connector to the
aerial input on the TV.
5. Turn the TV on, and start playback on
the camera.
¢ See p. 13 for playback.
6. Set both the TV and the RF unit to the
video channel.
If your TV does not have audio/video input terminals _
RU-100 RF Unit
The video channel is the channel which is not used
by a broadcasting station in your area and can be
used for cassette playback.
European model
First set the G/I selector on the RF unit.
¢ In continental Europe, set it to G.
* In the UK, Hong Kong and South Africa, set it to |.
If it is not set properly, you will be able to see the
picture, but not hear the sound.
Next, set the TV and the CH selector on the RF
unit to the video channel. The selector is factory-
set to channel 32. Adjust it by turning until the
picture is clear.
Australian model
Set the TV and the RF unit to channel 0 or 1.
Note:
* Turn the camera off or disconnect it fromm the RF
unit when you want to watch a broadcast
programme. If you leave the camera connected
and turned on, the RF unit will automatically
select the camera signal instead of the broadcast
signal.
Advertisement
Table of Contents
