CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module
IRDETO ACCESS
Active Antenna Power
On
Z
Back
Select
Exit
OPERATION WITH COMMON INTERFACE
Inserting the CA module
Note:
Switch off the appliance before inserting the CA module in the
»CI« slot.
1
Insert the smart card into the CA module.
2
Insert the CA module with the smart card into the »CI« slot on the
television.
Note:
To see which CA module is in the Common Interface slot, go to
the »CA - Module« submenu.
Access control for CA module and smart card
1
Open the menu with »i«.
– The »PICTURE« menu is displayed.
s
2
Select the »CHANNEL SETUP« menu with »
s
s
firm with »G«.
s
3
Select »CA–Module« with »
confirm.
s
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CA
module and smart card.
i
4
Press »
« to finish the settings.
–
+
« or »
« or »
« and press »G« to
V
Λ
« and con-
37