Troubleshooting - REVELL AURA User Manual

Number Problems
Indicator light for
1
powersupply is
not working
Indicator light for
2
function is not
working
Infrared Heater is
3
not heating up
Odor from the
4
sauna
TROUBLE SHOOTING
Possible reasons
The connector is not connected
properly
No power supply input
Indicator light is broken
The heating indicator light is
broken
The circuit board or components
are broken
The temperature sensor is broken
The heater is broken
The wire junction or the heater's
wire is loosen
The temperature sensor is broken
The circuit board of the relay is not
work
The circuit's problems
Countermeasure
Check the connector or replace
with a new one
Check the circuity (especially
where there is power supply input)
Replace the circuity panel
Replace the relevant control panel
Replace the circuit board
Check if the connect is loosened
and replace it
Replace with a new one of the
same specifications
Check and make them tight
Check if junction of the
temperature sensor is loosened
and replace it
Replace the circuit board
1) There is eyewinker around,
remove it
2)Some heater's temperature over
high, cut off the power supply,
replace it.
3) Parts on the circuity is broken