Table of Contents
Advertisement
Problem and alarm code
Rattling or knocking sounds from
the inside of the appliance.
The appliance trips the circuit-beak‐
er.
Refer to "Before first use", "Daily use",
or "Hints and tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
12.1 The dishwashing and drying results are not satisfactory
Problem
Poor washing results.
Poor drying results.
There are whitish streaks or bluish lay‐
ers on glasses and dishes.
Possible cause and solution
•
The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
•
Make sure that the spray arms can rotate freely.
•
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
Possible cause and solution
•
Refer to "Daily use", "Hints and tips" and the basket loading leaf‐
let.
•
Use more intensive washing programme.
•
Activate the Extra Power option to improve the washing results of a
selected programme.
•
Clean spray arm jets and filter. Refer to "Care and Cleaning".
•
Tableware was left for too long inside the closed appliance. Activate
the function AirDry to set the automatic opening of the door and to
improve the drying performance.
•
There is no rinse aid or the dosage of rinse aid is not sufficient. Fill
the rinse aid dispenser or set the dosage of rinse aid to a higher lev‐
el.
•
The quality of the rinse aid can be the cause.
•
Always use rinse aid, even with multi-tablets.
•
Plastic items may need to be towel dried.
•
The programme does not have the drying phase. Refer to "Pro‐
grammes overview".
•
The released quantity of rinse aid is too high. Adjust the rinse aid
dosage to a lower level.
•
The quantity of detergent is too high.
WARNING!
ENGLISH
25
Advertisement
Table of Contents
