Sony STR-D311 Operating Instructions Manual page 8

Hide thumbs Also See for STR-D311:

at-leelaelfavem-lemalelol(om=relelcet=)

POWER

> ON

MONITOR

indicator

1 Select the desired program source with the

function selector.

For an FM/AM broadcast, tune in the desired station.

2 Set the tape (DAT) deck in the recording mode.

Start the selected program source.

Note on recording

The settings of VOLUME, BASS/TREBLE, BALANCE and

LOUDNESS do not have any effect on recording.

To monitor recorded sound during recording (when a

cassette deck with a three-head system Is connected)

Select the program to be recorded and then press TAPE 2

MONITOR so that the TAPE 2 MONITOR indicator lights up.

If TAPE 2 MONITOR is pressed before selecting the

program to be recorded, the monitor function is released.

Note

Only the recorded sound of a cassete deck connected to

TAPE 2 jacks can be monitored.

SF-}sl-mBlUleleliare]

to TAPE 2

REC OUT

1. Insert the recorded tape into tape deck B (or the

DAT deck) and a blank tape into tape deck A.

Press TAPE 1/DAT to select the deck for playback.

Adjust the recording levei of tape deck A.

4 Start the playback of the tape (or the DAT) in tape

deck B (or the DAT deck), and set tape deck A in

the recording mode.

Dubbing will start.

Table of Contents