ET3AC Function
Signal Generator anual
Function:
BEG
Couplin;
Oullz,
Ons
On
Ons
0. ON
Figure 4-3-1 Measurement mode - Frequency meter and counter
The measurement modo has 2 func
measure digital
sianals from the external input port
ns, one is a frequeney moter, the other is a counter. They
Lie fequeney meter is vsed to
measure de Mequcncy. The fiegveney is measured by equal
precisien measurement. The coupling and gate fime can be set
"Tae caunter is used to count the number of pulses. and can bo set to turn on he coupling and
function, as well as the number of zeroes,
4. 4. System Interface operations
Press the SVS key to enter system Settings, as shown in Figure 4-41
Sound:
Brightnes:
Language:
Arb Wave
Calibration:
Factory Re
Figure 4-4-1 System Settings
nes page displays the curvent software version
The system
Sel!
Ut can load and save the system parameters, ser the buzzer to open and close, the brightness ef the
sereen, (ie English and Chinese language switching, and edit, save zmd load any wave, ealibrate, and
restore factory Settings.
Press soft keys F1 to FS to select and opernte objects
Load and save operation van save and load the current various parameter Settings. After the sound
and brightness are changed, vou need to press (he save soll key F1 (o save (he Settings. The setting valu=
will be mint
otherwise Ile original seting
ed afier the power is off aud the instru
is restaner
value will be restored
Any wave cam save Ihe waveform data of the current main channel to any set wave position. Clcar
or load the waveform data at any wave posi jon currently set
Hangzhou zhes
Eleetronies C O , Ltd