Table of Contents
Advertisement
•
Section the hair prior to styling. Style the lower layers first.
•
Use the styling glove to avoid accidental burns.
1.
Plug your styler into the mains power supply.
2. Press the on (C) button to switch on.
3. When it is ready to use, your styler will beep three times and the display will stop flashing.
StyleAdapt™ Mode
1.
When first switched on your styler will be in StyleAdapt™ mode 1. The StyleAdapt™ indicator
will be fully lit up and StyleAdapt 1 will be shown on the display.
2. Working on one section at a time, hold the handle with the cool tip facing down and wrap a
section of hair around the barrel.
•
IMPORTANT: When wrapping ensure that hair is wrapped around the StyleAdapt™ sensor (Fig.
A).
3. Wait 10-20 seconds for your curl to form.
4. Unwind the hair to release the curl.
5.
Repeat this around the head to create as many curls as desired.
•
Tip: let the curls cool before styling and brushing; this will help to prolong the curls.
6. During styling, the StyleAdapt™ indicator will spin (fig. B) indicating that your styler is learning
about your hair and adjusting the barrel temperature to a heat that is personalised to you. The
temperature changes are not shown on the display but happen quickly and automatically
during styling.
•
NOTE: If the indicator spins when your styler is not in use this just means that StyleAdapt™ Mode
is on.
•
If you are sharing your styler select StyleAdapt™ mode 2. This ensures that when the styler is
used by someone else, it doesn't change what it has learned about your hair. To select, press the
K button until StyleAdapt 2 is shown on the display.
Manual Mode
1.
To override the StyleAdapt™ mode and use as a standard styler, press the K button several
times until the display shows the temperture (e.g. 160ºC) and the StyleAdapt™ indicator goes
off. Note that in manual mode, your styler will no longer be learning about your hair and
adapting the heat.
2. Select the appropriate temperature for your hair type using the "+" and "-" temperature
controls on the side of the product. Start styling on lower temperatures first.
3. The "+" button will increase the temperature and the "-" button will decrease the temperature.
Recommended Temperatures
Temperature
270°F - 320°F
340°F - 400°F
400°F - 410°F
Caution: the hottest temperatures should only be used by experienced stylers.
Hair type
Thin / fine, damaged or bleached hair
Normal, healthy hair
Thick and difficult to style hair
5
Advertisement
Table of Contents
